该参考描述所示目录。请向院校确认当前的招生项目及适用于您入学年的条件。
描述
带薪实习安置 V 带薪实习安置（4个月），与经批准的雇主合作。限制：仅对 PHYS 带薪实习学生开放。 PHYS 2C01 带薪实习反思性学习与整合 I 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。限制：仅对 PHYS 带薪实习学生开放。先修课：SCIE 0N90 。同课（Corequisite）：PHYS 0N01 。注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C02 带薪实习反思性学习与整合 II 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。限制：仅对 PHYS 带薪实习学生开放。先修课：SCIE 0N90 。同课：PHYS 0N02 。注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C03 带薪实习反思性学习与整合 III 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。限制：仅对 PHYS 带薪实习学生开放。先修课：SCIE 0N90 。同课：PHYS 0N03 。注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C04 带薪实习反思性学习与整合 IV 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。限制：仅对 PHYS 带薪实习学生开放。先修课：SCIE 0N90 。同课：PHYS 0N04 。注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C05 带薪实习反思性学习与整合 V 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。限制：仅对 PHYS 带薪实习学生开放。先修课：SCIE 0N90 。同课：PHYS 0N05 。注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 | 图像最后更新：July 8, 2024 @ 02:15PM
先修课程
- 先修课程：SCIE 0N90。
- 先修课程：SCIE 0N90。
- 先修课程：SCIE 0N90。
- 先修课程：SCIE 0N90。
- 先修课程：SCIE 0N90。
条件与方式
- 限制：仅对 PHYS 带薪实习学生开放。 PHYS 2C01 带薪实习反思性学习与整合 I 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。
- 限制：仅对 PHYS 带薪实习学生开放。
- 先修课程：SCIE 0N90。
- 同课：PHYS 0N01 。
- 注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C02 带薪实习反思性学习与整合 II 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。
- 同课：PHYS 0N02 。
- 注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C03 带薪实习反思性学习与整合 III 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。
- 限制：仅对 PHYS 带薪实习学生开放。
- 同课：PHYS 0N03 。
- 注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C04 带薪实习反思性学习与整合 IV 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。
- 同课：PHYS 0N04 。
- 注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 PHYS 2C05 带薪实习反思性学习与整合 V 通过雇主现场的职业导向工作体验，为学生提供将其学术学习应用于实践的机会。
- 同课：PHYS 0N05 。
- 注意：学生需准备学习目标、参加现场访问、撰写工作期报告并获得成功的工作期绩效评估。本课程可能以多种授课方式提供。授课方式将在相应学期的教学时间表上列出。 | 图像最后更新：July 8, 2024 @ 02:15PM
原文参考文本
Co-op Work Placement V Co-op placement (4 months) with an approved employer. Restriction: open to PHYS Co-op students. PHYS 2C01 Co-op Reflective Learning and Integration I Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites. Restriction: open to PHYS Co-op students. Prerequisite(s): SCIE 0N90 . Corequisite(s): PHYS 0N01 . Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C02 Co-op Reflective Learning and Integration II Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites. Restriction: open to PHYS Co-op students. Prerequisite(s): SCIE 0N90 . Corequisite(s): PHYS 0N02 . Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C03 Co-op Reflective Learning and Integration III Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites. Restriction: open to PHYS C-op students. Prerequisite(s): SCIE 0N90 . Corequisite(s): PHYS 0N03 . Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C04 Co-op Reflective Learning and Integration IV Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites. Restriction: open to PHYS Co-op students. Prerequisite(s): SCIE 0N90 . Corequisite(s): PHYS 0N04 . Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C05 Co-op Reflective Learning and Integration V Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites. Restriction: open to PHYS Co-op students. Prerequisite(s): SCIE 0N90 . Corequisite(s): PHYS 0N05 . Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. | Image Last updated: July 8, 2024 @ 02:15PM
- Prerequisite(s): SCIE 0N90 .
- Restriction: open to PHYS Co-op students. PHYS 2C01 Co-op Reflective Learning and Integration I Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites.
- Restriction: open to PHYS Co-op students.
- Corequisite(s): PHYS 0N01 .
- Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C02 Co-op Reflective Learning and Integration II Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites.
- Corequisite(s): PHYS 0N02 .
- Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C03 Co-op Reflective Learning and Integration III Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites.
- Restriction: open to PHYS C-op students.
- Corequisite(s): PHYS 0N03 .
- Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C04 Co-op Reflective Learning and Integration IV Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites.
- Corequisite(s): PHYS 0N04 .
- Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. PHYS 2C05 Co-op Reflective Learning and Integration V Provides students with the opportunity to apply what they haveve learned in their academic studies through career-oriented work experiences at employer sites.
- Corequisite(s): PHYS 0N05 .
- Note: students will be required to prepare learning objectives, participate in a site visit, write a work term report and receive a successful work term performance evaluation. This course may be offered in multiple modes of delivery. The method of delivery will be listed on the academic timetable, in the applicable term. | Image Last updated: July 8, 2024 @ 02:15PM
来源与参考
为帮助您核实信息，保留了日期和来源。为便于阅读提供了翻译；以官方来源为准，查看条件和要求。
来源参考 : https://brocku.ca/webcal/2024/undergrad/phys.html