This reference describes the indicated catalogue. Check with the institution to confirm the current offer and the conditions applicable to your intake.
Description
Mechatronic System Design Introduction to mechatronics systems design. Integration of mechanical, electrical and computer systems. Designing mechatronic systems using sensors and instrumentation, modeling of mechatronics systems, response, actuators and motors, analog/digital or digital/analog conversion, microprocessor and microcontroller, and programmable logic controller (PLC). Lecture, 3 hours per week; lab, 2 hours lab per week. Restriction: open to BEng majors with a minimum 16 overall credits. Prerequisite(s): IENG 2P03 , IENG 3P13 .
Prerequisites
- Prerequisite(s): IENG 2P03 , IENG 3P13 .
Conditions and arrangements
- Restriction: open to BEng majors with a minimum 16 overall credits.
- Prerequisite(s): IENG 2P03 , IENG 3P13 .
Reference text in its original language
Mechatronic System Design Introduction to mechatronics systems design. Integration of mechanical, electrical and computer systems. Designing mechatronic systems using sensors and instrumentation, modeling of mechatronics systems, response, actuators and motors, analog/digital or digital/analog conversion, microprocessor and microcontroller, and programmable logic controller (PLC). Lecture, 3 hours per week; lab, 2 hours lab per week. Restriction: open to BEng majors with a minimum 16 overall credits. Prerequisite(s): IENG 2P03 , IENG 3P13 .
- Prerequisite(s): IENG 2P03 , IENG 3P13 .
- Restriction: open to BEng majors with a minimum 16 overall credits.
Sources and references
Dates and sources are retained to help you verify the information. Translations are provided to facilitate reading; the official source governs conditions and requirements.
Source reference : https://brocku.ca/webcal/2024/undergrad/engs.html