Engineering

Program Requirements Course Categories for Engineering Programs The following categories of courses are used in defining the programs. Courses in these categories must be chosen from among those listed as acceptable for the corresponding academic year. Basic Science Electives Complementary Studies Electives Computer Science Electives for Software Engineering Science Electives for Biomedical and Electrical Engineering Science Electives for Computer Systems Engineering The list of course options for each category is published by term on the engineering academic support website: https://carleton.ca/engineering-design/current-students/undergrad-academic-support/electives-for-beng-programs/ . The list will change from term to term, and only courses on the list valid in the year the course is taken can be used as credit toward an engineering degree. Note: Access to courses on the list is not guaranteed and depends on space availability, scheduling options, and the satisfaction of course prerequisites; and Students are responsible for ensuring that the course(s) registered for are counting towards degree requirements (as noted in the academic audit record). Aerospace Engineering Bachelor of Engineering Students in Aerospace Engineering must satisfy the requirements for one of the following streams: Aerospace Engineering - Bachelor of Engineering Stream A: Aerodynamics, Propulsion and Vehicle Performance (21.0 credits) First Year 1. a) 4.0 credits in: 4.0 CHEM 1101 [0.5] Chemistry for Engineering Students ECOR 1031 [0.5] Programming and Data Management ECOR 1032 [0.5] Circuits and Mechatronics ECOR 1033 [0.5] Statics ECOR 1034 [0.5] Dynamics MATH 1004 [0.5] Calculus for Engineering or Physics MATH 1104 [0.5] Linear Algebra for Engineering or Science PHYS 1004 [0.5] Introductory Electromagnetism and Wave Motion b) The Introduction to Engineering Disciplines requirement must be met through the successful completion of: ECOR 1055 [0.0] Introduction to Engineering Disciplines I ECOR 1056 [0.0] Introduction to Engineering Disciplines II ECOR 1057 [0.0] Engineering Profession 2. 0.5 credit in Complementary Studies Electives 0.5 3. 0.5 credit in Basic Science Electives 0.5 Second Year 4. a) 5.0 credits in: 5.0 AERO 2001 [0.5] Aerospace Engineering Graphical Design ECOR 2050 [0.5] Design and Analysis of Engineering Experiments ELEC 3605 [0.5] Electrical Engineering MAAE 2101 [0.5] Engineering Dynamics MAAE 2202 [0.5] Mechanics of Solids I MAAE 2300 [0.5] Fluid Mechanics I MAAE 2400 [0.5] Thermodynamics and Heat Transfer MAAE 2700 [0.5] Engineering Materials MATH 1005 [0.5] Differential Equations and Infinite Series for Engineering or Physics MATH 2004 [0.5] Multivariable Calculus for Engineering or Physics b) Successful completion of ECOR 2995 [0.0] Engineering Portfolio Third Year 5. 5.5 credits in: 5.5 AERO 3002 [0.5] Aerospace Design and Practice AERO 3700 [0.5] Aerospace Materials CCDP 2100 [0.5] Communication Skills for Engineering Students ECOR 3800 [0.5] Engineering Economics MAAE 3004 [0.5] Dynamics of Machinery MAAE 3202 [0.5] Mechanics of Solids II MAAE 3300 [0.5] Fluid Mechanics II MAAE 3400 [0.5] Applied Thermodynamics MAAE 3500 [0.5] Feedback Control Systems MATH 3705 [0.5] Mathematical Methods I SYSC 3600 [0.5] Systems and Simulation Fourth Year 6. 2.5 credits from: 2.5 AERO 4003 [0.5] Aerospace Systems Design AERO 4302 [0.5] Aircraft Aerodynamics AERO 4306 [0.5] Aerospace Vehicle Performance AERO 4308 [0.5] Aircraft Stability and Control ECOR 4995 [0.5] Professional Practice 7. 1.0 credit from 1.0 MAAE 4907 [1.0] Engineering Design Project OR ECOR 4907 [1.0] Multidisciplinary Engineering Project 8. 1.0 credit in 4000-level Mechanical and Aerospace Engineering (MAAE, AERO, or MECH) 1.0 9. 0.5 credit from: 0.5 AERO 4402 [0.5] Aircraft Propulsion AERO 4442 [0.5] Transatmospheric and Spacecraft Propulsion AERO 4607 [0.5] Rotorcraft Aerodynamics and Performance 10. 0.5 credit in Complementary Studies Electives 0.5 Total Credits 21.0 Aerospace Engineering - Bachelor of Engineering Stream B: Aerospace Structures, Systems and Vehicle Design (21.0 credits) First year 1. a) 4.0 credits in: 4.0 CHEM 1101 [0.5] Chemistry for Engineering Students ECOR 1031 [0.5] Programming and Data Management ECOR 1032 [0.5] Circuits and Mechatronics ECOR 1033 [0.5] Statics ECOR 1034 [0.5] Dynamics MATH 1004 [0.5] Calculus for Engineering or Physics MATH 1104 [0.5] Linear Algebra for Engineering or Science PHYS 1004 [0.5] Introductory Electromagnetism and Wave Motion b) The Introduction to Engineering Disciplines requirement must be met through the successful completion of: ECOR 1055 [0.0] Introduction to Engineering Disciplines I ECOR 1056 [0.0] Introduction to Engineering Disciplines II ECOR 1057 [0.0] Engineering Profession 2. 0.5 credit in Complementary Studies Electives 0.5 3. 0.5 credit in Basic Science Electives 0.5 Second year 4. a) 5.0 credits in: 5.0 AERO 2001 [0.5] Aerospace Engineering Graphical Design ECOR 2050 [0.5] Design and Analysis of Engineering Experiments ELEC 3605 [0.5] Electrical Engineering MAAE 2101 [0.5] Engineering Dynamics MAAE 2202 [0.5] Mechanics of Solids I MAAE 2300 [0.5] Fluid Mechanics I MAAE 2400 [0.5] Thermodynamics and Heat Transfer MAAE 2700 [0.5] Engineering Materials MATH 1005 [0.5] Differential Equations and Infinite Series for Engineering or Physics MATH 2004 [0.5] Multivariable Calculus for Engineering or Physics b) Successful completion of ECOR 2995 [0.0] Engineering Portfolio Third year 5. 5.5 credits in: 5.5 AERO 3002 [0.5] Aerospace Design and Practice AERO 3101 [0.5] Lightweight Structures AERO 3700 [0.5] Aerospace Materials CCDP 2100 [0.5] Communication Skills for Engineering Students ECOR 3800 [0.5] Engineering Economics MAAE 3004 [0.5] Dynamics of Machinery MAAE 3202 [0.5] Mechanics of Solids II MAAE 3300 [0.5] Fluid Mechanics II MAAE 3500 [0.5] Feedback Control Systems MATH 3705 [0.5] Mathematical Methods I SYSC 3600 [0.5] Systems and Simulation Fourth year 6. 2.5 credits in: 2.5 AERO 4003 [0.5] Aerospace Systems Design AERO 4602 [0.5] Introductory Aeroelasticity AERO 4608 [0.5] Composite Materials ECOR 4995 [0.5] Professional Practice MAAE 4102 [0.5] Materials: Strength and Fracture 7. 1.0 credit from: 1.0 MAAE 4907 [1.0] Engineering Design Project OR ECOR 4907 [1.0] Multidisciplinary Engineering Project 8. 1.0 credits in 4000-level Mechanical and Aerospace Engineering (MAAE, AERO, or MECH) 1.0 9. 0.5 credits from: 0.5 AERO 4609 [0.5] Joining of Materials MECH 4103 [0.5] Fatigue and Fracture Analysis MECH 4104 [0.5] Vibration Analysis MECH 4604 [0.5] Finite Element Methods 10. 0.5 credit in Complementary Studies Electives 0.5 Total Credits 21.0 Aerospace Engineering - Bachelor of Engineering Stream C: Aerospace Electronics and Systems (21.0 credits) First year 1. a) 4.0 credits in: 4.0 CHEM 1101 [0.5] Chemistry for Engineering Students ECOR 1031 [0.5] Programming and Data Management ECOR 1032 [0.5] Circuits and Mechatronics ECOR 1033 [0.5] Statics ECOR 1034 [0.5] Dynamics MATH 1004 [0.5] Calculus for Engineering or Physics MATH 1104 [0.5] Linear Algebra for Engineering or Science PHYS 1004 [0.5] Introductory Electromagnetism and Wave Motion b) The Introduction to Engineering Disciplines requirement must be met through the successful completion of: ECOR 1055 [0.0] Introduction to Engineering Disciplines I ECOR 1056 [0.0] Introduction to Engineering Disciplines II ECOR 1057 [0.0] Engineering Profession 2. 0.5 credit in Complementary Studies Electives 0.5 3. 0.5 credit in Basic Science Elective 0.5 Second year 4. a) 5.0 credits in: 5.0 AERO 2001 [0.5] Aerospace Engineering Graphical Design ECOR 2050 [0.5] Design and Analysis of Engineering Experiments ELEC 2501 [0.5] Circuits and Signals ELEC 2507 [0.5] Electronics I ELEC 2607 [0.5] Switching Circuits MAAE 2101 [0.5] Engineering Dynamics MAAE 2202 [0.5] Mechanics of Solids I MATH 1005 [0.5] Differential Equations and Infinite Series for Engineering or Physics MATH 2004 [0.5] Multivariable Calculus for Engineering or Physics SYSC 3600 [0.5] Systems and Simulation b) Successful completion of ECOR 2995 [0.0] Engineering Portfolio Third year 5. 5.5 credits in: 5.5 AERO 3002 [0.5] Aerospace Design and Practice CCDP 2100 [0.5] Communication Skills for Engineering Students ECOR 3800 [0.5] Engineering Economics ELEC 3105 [0.5] Electromagnetic Fields ELEC 3500 [0.5] Digital Electronics ELEC 3509 [0.5] Electronics II ELEC 3909 [0.5] Electromagnetic Waves MAAE 2300 [0.5] Fluid Mechanics I MAAE 2700 [0.5] Engineering Materials MAAE 3500 [0.5] Feedback Control Systems MATH 3705 [0.5] Mathematical Methods I Fourth year 6. 3.0 credits in: 3.0 AERO 3504 [0.5] Avionics I AERO 4003 [0.5] Aerospace Systems Design AERO 4504 [0.5] Avionics II ECOR 4995 [0.5] Professional Practice MAAE 2400 [0.5] Thermodynamics and Heat Transfer SYSC 3501 [0.5] Communication Theory 7. 1.0 credit from: 1.0 MAAE 4907 [1.0] Engineering Design Project OR ECOR 4907 [1.0] Multidisciplinary Engineering Project 8. 1.0 credits from: 4000-level AERO, MAAE or MECH, or 1.0 AERO 3240 [0.5] Orbital Mechanics AERO 3841 [0.5] Spacecraft Design I ELEC 4502 [0.5] Microwave Circuits ELEC 4503 [0.5] Radio Frequency Lines and Antennas ELEC 4505 [0.5] Telecommunication Circuits ELEC 4506 [0.5] Computer-Aided Design of Circuits and Systems ELEC 4509 [0.5] Communication Links ELEC 4600 [0.5] Radar and Navigation ELEC 4609 [0.5] Integrated Circuit Design and Fabrication ELEC 4703 [0.5] Solar Cells ELEC 4706 [0.5] High-Speed Electronics: Circuits and Systems ELEC 4707 [0.5] Analog Integrated Electronics ELEC 4708 [0.5] Advanced Digital Integrated Circuit Design ELEC 4709 [0.5] Integrated Sensors SYSC 4205 [0.5] Image Processing for Medical Applications SYSC 4600 [0.5] Digital Communications SYSC 4607 [0.5] Wireless Communications 9. 0.5 credit in Complementary Studies Electives 0.5 Total Credits 21.0 Aerospace Engineering - Bachelor of Engineering Stream D: Space Systems Design (21.0 credits) First year 1. a) 4.0 credits in: 4.0 CHEM 1101 [0.5] Chemistry for Engineering Students ECOR 1031 [0.5] Programming and Data Management ECOR 1032 [0.5] Circuits and Mechatronics ECOR 1033 [0.5] Statics ECOR 1034 [0.5] Dynamics MATH 1004 [0.5] Calculus for Engineering or Physics MATH 1104 [0.5] Linear Algebra for Engineering or Science PHYS 1004 [0.5] Introductory Electromagnetism and Wave Motion b) The Introduction to Engineering Disciplines requirement must be met through the successful completion of: ECOR 1055 [0.0] Introduction to Engineering Disciplines I ECOR 1056 [0.0] Introduction to Engineering Disciplines II ECOR 1057 [0.0] Engineering Profession 2. 0.5 credit in Complementary Studies Electives 0.5 3. 0.5 credit in Basic Science Electives 0.5 Second year 4. a) 4.5 credits in: 4.5 AERO 2001 [0.5] Aerospace Engineering Graphical Design ECOR 2050 [0.5] Design and Analysis of Engineering Experiments MAAE 2101 [0.5] Engineering Dynamics MAAE 2202 [0.5] Mechanics of Solids I MAAE 2300 [0.5] Fluid Mechanics I MAAE 2400 [0.5] Thermodynamics and Heat Transfer MATH 1005 [0.5] Differential Equations and Infinite Series for Engineering or Physics MATH 2004 [0.5] Multivariable Calculus for Engineering or Physics SYSC 3600 [0.5] Systems and Simulation b) Successful completion of ECOR 2995 [0.0] Engineering Portfolio 5. 0.5 credit in Complementary Studies Electives 0.5 Third year 6. 5.0 credits in: 5.0 AERO 3002 [0.5] Aerospace Design and Practice AERO 3240 [0.5] Orbital Mechanics AERO 3841 [0.5] Spacecraft Design I CCDP 2100 [0.5] Communication Skills for Engineering Students ECOR 3800 [0.5] Engineering Economics MAAE 2700 [0.5] Engineering Materials MAAE 3004 [0.5] Dynamics of Machinery MAAE 3300 [0.5] Fluid Mechanics II MAAE 3500 [0.5] Feedback Control Systems MATH 3705 [0.5] Mathematical Methods I Fourth year 7. 3.5 credits in: 3.5 AERO 3303 [0.5] High-Speed Flight Aerodynamics AERO 4442 [0.5] Transatmospheric and Spacecraft Propulsion AERO 4446 [0.5] Heat Transfer for Aerospace Applications AERO 4540 [0.5] Spacecraft Attitude Dynamics and Control AERO 4842 [0.5] Spacecraft Design II ECOR 4995 [0.5] Professional Practice ELEC 4509 [0.5] Communication Links 8. 1.0 credit from: 1.0 MAAE 4907 [1.0] Engineering Design Project OR ECOR 4907 [1.0] Multidisciplinary Engineering Project 9. 1.5 credits from 4000-level MAAE, AERO or MECH, or 1.5 AERO 3101 [0.5] Lightweight Structures AERO 3700 [0.5] Aerospace Materials ELEC 4600 [0.5] Radar and Navigation ELEC 4709 [0.5] Integrated Sensors Total Credits 21.0 Architectural Conservation and Sustainability Engineering - Bachelor of Engineering (21.5 credits) First year 1. a) 4.5 credits in: 4.5 ARCH 1331 [0.5] Introduction to Architecture CHEM 1101 [0.5] Chemistry for Engineering Students ECOR 1031 [0.5] Programming and Data Management ECOR 1032 [0.5] Circuits and Mechatronics ECOR 1033 [0.5] Statics ECOR 1034 [0.5] Dynamics MATH 1004 [0.5] Calculus for Engineering or Physics MATH 1104 [0.5] Linear Algebra for Engineering or Science PHYS 1004 [0.5] Introductory Electromagnetism and Wave Motion b) The Introduction to Engineering Disciplines requirement must be met through the successful completion of: ECOR 1055 [0.0] Introduction to Engineering Disciplines I ECOR 1056 [0.0] Introduction to Engineering Disciplines II ECOR 1057 [0.0] Engineering Profession 2. 0.5 credit in Basic Science Electives 0.5 Second year 3. a) 5.5 credits in: 5.5 ACSE 2001 [0.5] Architecture and the Environment ARCH 2221 [0.5] Ecological & Regulatory Systems CCDP 2100 [0.5] Communication Skills for Engineering Students CDNS 2400 [0.5] Heritage Places and Practices in Canada CIVE 2200 [0.5] Mechanics of Solids I CIVE 2700 [0.5] Civil Engineering Materials ECOR 2050 [0.5] Design and Analysis of Engineering Experiments MAAE 2300 [0.5] Fluid Mechanics I MAAE 2400 [0.5] Thermodynamics and Heat Transfer MATH 1005 [0.5] Differential Equations and Infinite Series for Engineering or Physics MATH 2004 [0.5] Multivariable Calculus for Engineering or Physics b) Successful completion of ECOR 2995 [0.0] Engineering Portfolio Third year 4. 5.5 credits in: 5.5 ACSE 3105 [0.5] Green Building Design ACSE 3201 [0.5] Introduction to Building Performance Simulation ACSE 3207 [0.5] Historic Site Recording and Assessment ACSE 3209 [0.5] Building Science ARCH 3221 [0.5] Assemblies CIVE 3203 [0.5] Introduction to Structural Analysis CIVE 3204 [0.5] Introduction to Structural Design CIVE 3205 [0.5] Design of Structural Steel Components CIVE 3206 [0.5] Design of Reinforced Concrete Components CIVE 4202 [0.5] Wood Engineering ECOR 3800 [0.5] Engineering Economics Fourth year 5. 3.0 credits in: 3.0 ACSE 4101 [0.5] Introduction to Structural Assessment of Historic Masonry Buildings ACSE 4106 [0.5] Indoor Environmental Quality ACSE 4107 [0.5] Building Services Engineering ACSE 4601 [0.5] Building Pathology and Rehabilitation ARCH 3331 [0.5] Architectural Conservation Philosophy and Ethics ECOR 4995 [0.5] Professional Practice 6. 1.0 credit from 1.0 ACSE 4918 [1.0] Design Project OR ECOR 4907 [1.0] Multidisciplinary Engineering Project 7. 1.5 credits from: 1.5 ACSE 4907 [1.0] Engineering Research Project ACSE 4917 [0.5] Undergraduate Directed Study CIVE 3202 [0.5] Mechanics of Solids II CIVE 3208 [0.5] Geotechnical Mechanics CIVE 3307 [0.5] Municipal Hydraulics CIVE 4200 [0.5] Matrix Analysis of Framed Structures CIVE 4201 [0.5] Finite Element Methods in Civil Engineering CIVE 4302 [0.5] Reinforced and Prestressed Concrete Design CIVE 4303 [0.5] Urban Systems CIVE 4308 [0.5] Behaviour and Design of Steel Structures CIVE 4400 [0.5] Construction/Project Management CIVE 4403 [0.5] Masonry Design CIVE 4407 [0.5] Municipal Engineering CIVE 4500 [0.5] Computer Methods in Civil Engineering CIVE 4614 [0.5] Building Fire Safety ENVE 3003 [0.5] Water Resources Engineering ENVE 3100 [0.5] Air Quality Engineering ENVE 3105 [0.5] Engineering and Decision Analysis ENVE 4003 [0.5] Air Pollution and Emissions Control ENVE 4101 [0.5] Waste Management ENVE 4200 [0.5] Climate Change and Engineering MECH 4407 [0.5] Heating and Air Conditioning SREE 4002 [0.5] Modelling and Analysis of Energy Systems: Risk, Reliability, and Economics Total Credits 21.5 Biomedical and Electrical Engineering Bachelor of Engineering (21.0 credits)

Academic Continuation Evaluation In addition to the requirements presented here, students must satisfy the University regulations common to all undergraduate students including the process of Academic Continuation Evaluation (see Section 3.2 Academic Progression , in the Academic Regulations of the University ), with the following additions and amendments: In Engineering programs, all credits are included in the Major CGPA, making it identical to the Overall CGPA. Students who are not assigned the status Eligible to Continue (EC) or Academic Warning (AW) will be required to leave the degree with either the status Continue in Alternate (CA) or Dismissed from Program (DP). Graduation Students in Engineering programs are covered by the common University regulations regarding graduation, with the following additions and amendments. Students entering an Engineering program with Advanced Standing will receive transfer credit for at most ten of the credits required for their program. To be eligible for graduation, the most recent grade in every course used to meet the requirements of the Bachelor of Engineering degree must be a passing grade. Course Load Regulations regarding Course Load and Overload can be found in the Academic Regulations of the University section of this Calendar. The normal course load in Engineering is defined as the number of credits required in the student's program for the current year status of the students. Since the programs in Engineering require more than 20.0 credits in total, the normal course load is more than 5.0 credits in some years of the program. Registration in more than this number of credits constitutes an overload. Co-operative Education Programs All Engineering programs are available with or without participation in the Co-operative Education option. Time Limit The Bachelor of Engineering degree must be completed within eight calendar years of initial registration. Students who do not complete their program requirements within this limit will be given the status Continue in Alternate (CA). Academic Appeals The Engineering Committee on Admission and Studies handles all academic appeals. Co-operative Education For more information about how to apply for the Co-op program and how the Co-op program works please visit the Co-op website . All students participating in the Co-op program are governed by the Undergraduate Co-operative Education Policy. Undergraduate Co-operative Education Policy Admission Requirements Students can apply to Co-op in one of two ways: directly from high school, or after beginning a degree program at Carleton. If a student applies to a degree program with a Co-op option from high school, their university grades will be reviewed two terms to one year prior to their first work term to ensure they meet the academic requirements after their first or second year of study. The time at which the evaluation takes place depends on the program of study. Students will automatically receive an admission decision via their Carleton email account. Students who did not request Co-op at the time they applied to Carleton can request Co-op after they begin their university studies. To view application instructions and deadlines, please visit carleton.ca/co-op . To be admitted to Co-op, a student must successfully complete 5.0 or more credits that count towards their degree, meet the minimum CGPA requirement(s) for the student's Co-op option, and fulfil any specified course prerequisites. To see the unique admission and continuation requirements for each Co-op option, please refer to the specific degree programs listed in the Undergraduate Calendar. Participation Requirements Co-op Participation Agreement All students must adhere to the policies found within the Co-op Participation Agreement. COOP 1000 Once a student has been admitted to the Co-op Program, they will be given access to register in COOP 1000. This zero-credit online course must be completed at least two terms prior to the student's first work term. Communication with the Co-op Office Students must maintain contact with the Co-op Office during their job search and while on a work term. All email communication will be conducted via the students' Carleton email account. Employment Although every effort is made to ensure a sufficient number of job postings for all Co-op students, no guarantee of employment can be made. The Co-op job search process is competitive, and success is dependent upon factors such as current market conditions, academic performance, skills, motivation, and level of commitment to the job search. It is the student's responsibility to apply for positions via the Co-op job board in addition to actively conducting a self-directed job search. Students who do not obtain a co-op work term are expected to continue with their academic studies. It should be noted that hiring priority for positions within the Federal Government of Canada is given to Canadian citizens. Registration Students must be registered as full-time during all fall and winter study terms beginning the term in which they enroll in COOP 1000. Students will be registered in a Co-op Work Term course while at work. This course does not carry academic course credit, but is noted on academic transcripts. Students may register in a 0.5 credit during a work term, provided the course is offered during the evening or is offered asynchronously online. Students must have at least one term of full-time studies left to complete following their final co-op work term. Students cannot end their degree on a work term. Work Term Assessment and Evaluation Work Term Evaluation Employers are responsible for submitting to Carleton University final performance evaluations for their Co-op students at the end of their work terms. Work Term Assessment In order to successfully complete the co-op work term, students must receive a Satisfactory (SAT) grade on their Co-op Work Term Report, which they must submit at the completion of each four-month work term. Graduation with the Co-op Designation In order to graduate with the Co-op Designation, students must satisfy all requirements of the degree program in addition to the successful completion of three or four work terms (the number is dependent upon the student's academic program). Students found in violation of the Co-op Participation Agreement may have the Co-op Designation withheld. Note: Participation in the co-op option will add up to one additional year for a student to complete their degree program. Voluntary Withdrawal from the Co-op Option Students who are currently on a co-op work term or who have already committed to a co-op work term either verbally or in writing may not leave the position and/or withdraw from the co-op option until they have completed the work term and all related requirements. Involuntary or Required Withdrawal from the Co-op Option Students may be removed from the Co-op Program for any of the following reasons: Failure to achieve a grade of SAT in COOP 1000; Failure to attend all interviews for positions to which the student has applied; Declining more than one job offer during the job search; Reneging on a co-op position that the student has accepted either verbally or in writing; Continuing a job search after accepting a co-op position; Dismissal from a work term by the co-op employer; Leaving a work term without approval from the Co-op Management Team; Receipt of an unsatisfactory work term evaluation; Receiving a grade of UNS on the work term report. International Students All international students are required to be legally eligible to work in Canada. Students are advised to discuss requirements with the Global Opportunities & International Student Services Office. Co-op Fees All participating Co-op students are required to pay Co-op fees. For full details, please see the Co-op website . Bachelor of Engineering: Co-op Admission and Continuation Requirements Maintain full-time status in each study term; Be eligible to work in Canada (for off-campus work); Have successfully completed COOP 1000 . In addition to the following: Registered as a full-time student in the B.Eng program; Successfully completed 5.0 or more credits with an Overall CGPA of at least 8.00. It is strongly recommended that students complete all second-year Engineering requirements prior to entering their first work term; An Overall CGPA of at least 8.00 must be maintained in order to remain eligible for the Co-op Program. B.Eng students must successfully complete four (4) work terms to obtain the Co-op Designation. Work Term Courses: